Focusrite iTrack Solo Lightning-Compatible Interface - Secondhand

Full Description

Studio-grade sound for Lightning/USB-equipped devices

Get professional-grade recordings at home or on the move with the iTrack Solo. Utilising Focusrite's award-winning design, the iTrack Solo delivers the same studio-grade sound quality as other interfaces with both a microphone and instrument input. The wide frequency range of both inputs captures every subtle detail of your performance with incredible detail. It also features built-in +48V Phantom Power so you can use studio-grade condenser microphones to achieve the best possible recordings. Whilst designed primarily for Lightning devices, you can also use the iTrack Solo with PCs and other USB-enable devices using the USB A-B cable that comes with the interface.

Compatible with a wide range of Apple devices, you can connect the iTrack Solo to a variety of mobile and computer devices including Lightning iPad: iPad Pro, iPad mini, iPad mini with Retina Display, iPad (4th gen and up) and iPad Air. Not only is it great for music, the iTrack Solo can also be used to record podcasts and online gaming. The rear-panel monitor outputs allow you to connect your speakers so you can immerse yourself in the music.

Zero-latency monitoring with ‘Direct Monitor’ switch

Latency can affect your recording process, by delaying the speed of how your audio is processed; but with the iTrack Solo you can eliminate this problem at its source. Enjoy zero-latency monitoring using the ‘Direct Monitor’ switch when using your headphones. This allows you to hear yourself in real-time as you record/perform with zero delay .

Compact and portable design

Sleek and stylish, the iTrack Solo features a bead-blasted aluminium case that is tough and robust – perfect for musicians on the move or at home. The compact design can easily fit within a backpack and features two gain knobs accompanied by halo signal indicators. The interface is also bus-powered, meaning it draws power from your device; eliminating the need for an external power supply.

Features

• Studio-grade recording for your Mac, iPad or PC
• XLR microphone input with dedicated gain control
• 1/4-inch instrument input with dedicated gain control
• Wide frequency response captures every detail of your performance
• Ideal for recording music and podcasts
• Zero-latency headphone monitoring (when ‘Direct Monitor’ switch is activated)
• 48V Phantom Power switch
• Two unbalanced monitor outputs – RCA phono
• USB 2.0 port
• Compact bus-powered design
• Kensington Lock slot
• Certified Apple compatibility

Specifications

• Frequency Response: 20Hz - 20kHz +/- 0.2 dB
• THD+N: < 0.002 percent (minimum gain, -1dBFS input with 22Hz/22kHz bandpass filter)
• Equivalent Input Noise (EIN): < -120dB: measured at minimum gain with, -1 dBFS (20Hz/22kHz bandpass filter)
• Gain Range: +10dB to +55dB
• Max Input Level: +4dBu

• Frequency Response: 20Hz - 20kHz +/- 0.2dB
• THD+N: 0.003 percent (measured with -1dBFS input and 22Hz/22kHz bandpass filter)
• Noise: -87dBu (22Hz/22kHz bandpass filter)
• Gain Range: -10dB to +55dB
• Max Input Level: +2dBu

• Nominal Output Level: 0dBFS = 10dBu, unbalanced
• Frequency Response: 20Hz - 20kHz +/- 0.2dB
• THD+N: < 0.001 percent (measured with 0dBFS input 22Hz/22kHz bandpass filter, un-weighted)

• Clock Sources: Internal clock only
• A-D Dynamic Range: 105dB 'A-weighted' (all inputs). Converter chipset A-D dynamic range 114dB
• D-A Dynamic Range:105dB 'A-weighted' (all outputs). Converter chipset D-A dynamic range 114dB
• Supported Sample Rates:
  • Mac and PC: 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz
  • iPad: 44.1 KHz, 48 KHz

• Input to Input: Better than 90dB
• Output to Output: Better than 90dB
• Input to Output: Better than 85dB

• Ring LED lit Green Signal present: -24 dBFS
• Ring LED lit Red Signal overload: 0dBFS, peak held for approximately 1 second

• Dimensions (HxWxD): 45 x 150 x 100 mm
• Weight: 500 grams
• Product Code: MOIS0010